Like maintaining nearly all instruments you will want to take care of the soldering station and carry out a little fundamental maintenance if you want them to keep on performing strongly for ages. Following many months spent soldering i have a little simple suggestions which will help you to take care of the gear. The very first thing to remember would be to by no means drop a solder iron onto hard surfaces like a workbench or maybe worse a tile flooring. The fragile thermostat inside might be ruined for good, rendering a expensive device unusable. To stay safe always support a soldering station in your stand provided because this will decrease the risk of flames.

Another thing to remember is to always keep the tip of your soldering iron clean using a damp rag. By means of thinking to always work having a uncontaminated end piece you’ll be able to prolong the life of the soldering iron by means of stopping this from oxidizing. A damp rag is all you need, if it is too wet you can even destroy your soldering iron. If you want to properly clean a Weller WES51 Soldering Station you can even use a moist rag, a little fine grain sanding paper, and also a soldering tip cleaner. Initially switch your soldering iron on then await it to become of hotness next push your soldering tip into the cleaner for about one minute. After that employ that moistened rag to scrub the iron whenever you utilize your soldering iron.

The following stage is to delicately abrase the top of your soldering station onto extremely fine sandpaper until shiny and clean. Another thing to remember is not to do this excessively regularly simply after the soldering end piece is very grimy. An additional crucial piece of recommendation is to never keep a %LINK1% turned on for a long phase of time. Leaving it stay there set to maximum temperature for a long time will harm your heating system component then lead to a soldering station not functioning correctly, replacement could possibly be dreadfully expensive.